Inventory managment is the artwork and science of attaining the set targets of deciding to buy the materials at the lowest viable costs, making sure sufficient go with the flow and making the mosteconomical use of such materials in order that the total cost of production is minimized through the creation of such an environment that would enable the humans make a contribution to the success of the objectives with least quantity of such inputs as money, time, materialetc. On the different hand, inventory manipulate is the science primarily based art of making sure that enough inventory is held via an agency to meet economically both its internal and external demand commitments. There can be dangers in holding both very a good deal or too little inventory, as such, inventory control is principally concerned with acquiring the correct balance or compromise between these two extremes. It is therefore, the extent that should be held that management is interested in.
Organization’s stock is an important component and its management is imperative to the company and cost lessening of the firm’s use. Appropriate warehousing of stock so that when products are requested, they are held at the wearhouse for the least time conceivable minimizing holding cost of stock (Wild, T., 2017). Consequently, other operational costs may increment inventory management costs like through the balance of requesting costs, holding costs, security stock and stock outs (Palevich, 2011) and (Wisner, Tan and Leong ,2011). Once an organization realizes this, it can create online stock management instrument to screen its stock data by breaking it down into bunches by relating the categories with its customers.
Beamon and Kotleba (2006) clarify that Re-order level (ROL) is helping organizations to attain ideal efficiency and be successful. They got to have two reorder levels one that’s normal whereas a second one that’s for emergency cases .This gives customer satisfaction.
Bachetti, Plebani, Saccani and Syntetos (2010) argue that inventory management got to be organized in a consistent way to encourage the organization knowledge of when to order and amount to order. financial order amount enables organizations plan their inventory replenishment on a timely basis such as month to month quarterly half yearly or yearly basis. as organizations attempt to move forward on the stock management economic order quantity EOQ and re-order point ROP are important tools organizations can use to guarantee that stock supply does not hit a stock out as clarified by (gonzalez and gonzalez ,2010 )
just-in-time (JIT) contributes significantly to an organizations positive execution and client satisfaction. a study attempted that in the us to analyze inventory management was found out that organizations that kept as well much stock in their warehouse an wasteful supply chain whereas those that kept minimal stock in their warehouse were exceptionally effective ( lai and cheng ,2009). Also was found out that keeping direct stock is nice and it empowers an organization work negligible costs of holding and setup costs eliminate undesirable lead time and create products as per clients order. this enables an organization accomplish total quality control (TQC) as proficient and successful supply chain management are executed in a firms value chain kumar and suresh (2009) datta ( 2007) guarantee an unceasing supply of raw materials to encourage continuous production.
security stock and stock outs (Palevich, 2012) and (Wisner, Tan and Leong 2011). Once an organization realizes this, it can create online stock administration instrument to screen its stock data by breaking it down into bunches by relating the categories with its customer
Aref Contractor Company Background
Aref Controcter is one of the unique companies in Jeddah Saudi Arabia owned by Abdullah Aref Alsharif. It was founded in 2006. It offers the customer a variety of services such as a design for residential and public buildings, road design, road construction,and gardens. Aref Contracting has a large number of clients from Jeddah, Riyadh, Makkah, Dammam and Tabuk, and now wants to expand in Saudi Arabia. The success is a strong relationship with customers and the believe in customer satisfaction.
Aref Contractor Company nature
Aref Contractor Company is providing all materials, labor and equipment such as cars, tools, engineers and services required to build the project. The main contractor is the person who hires the workers to perform construction work.
Inventory management is important to both the contractor company and manufacturing company . The availability of goods and materials that have the right amount of finished products, components and / or raw materials is essential to the success of a business. For example, if a company that sells goods or services has insufficient inventory, sales may be lost when customers access another company to purchase available goods or services. The cost to the business can increase, because costs associated with overstocking may include, but are not limited to, maintenance, storage, depreciation, amortization, loss of assets, such as money, net interest income, and / or inventory impairment. In any case, over-inventory will allocate capital that can be used more effectively elsewhere. Manufacturing companies or contracting companies face many challenges. In this regard, a manufacturer may require a variety of manufacturing parts / components used in the manufacture of a good. Inventory of inadequate workforce from these components can result in production delays, delivery delays, and ultimately, low customer satisfaction. As with entrepreneurs, it is necessary to reconcile the need for available stocks with the cost of excessive stock (Henderson, M., Pytel, D., McCreary, P. and Cortes, G., Flowvision LLC, 2013).
Any contracting company must manage its inventories effectively. Inventory management involves identifying inventory that must remain at hand at a given time, decisions regarding the purchase of raw materials in large quantities, the number of times physical orders are placed and the optimal time to submit a request. “Why do we always run out of stock?” A large number of contractors face the frustration and frustration of trying to maintain stable production processes at the same time, providing customers with appropriate services and maintaining investments in equities and equipment at reasonable levels. The fact that statements are made so often indicates the many conflicts of interest (Henderson, M., Pytel, D., McCreary, P. and Cortes, G., Flowvision LLC, 2013).
Aiming to improve the service , this paper studies on inventory situations throughout the contractor company and manufacturing . The findings of this research will be the input for improve the inventory managment to retain customers’ loyalty and trust, also to maintain the reputation of Aref Contractor Company
The research objectives (RO) can be further detailed as follows:
To determine the extent of inventory management techniques application in Aref Contractor.
To establish the challenges of inventory management implementation techniques in Aref Contractor.
To examine basic action models (such as EOQ), safty stocks also amount of work.
To find out how much the company loses by using quantitative volumes (EOQ).
The research questions (RQ) for this study are:
Objective 1. What is the amount of economic order of the Aref Contracting Company ?
Objective 2. Does the company buy in the amount of the economic order?
Objective 3. What basic inventory models are most common for contractor companies and manufacturing companies?
Objective 4. What should be the size of the inventory?
5. Is there a link between inventory levels and profitability?
Scope of Research
Inventory management is really a very broad area, but this study is limited to cotractor companies, with special reference to the Aref Contractor Company in Jeddah Saudi Arabia.
the Investigations in this project is to what extent the inventory managment have affected the profitability, efficiency e.t.c. Also, attempts are made to analyses any cost savings . Efforts are also made to relate the level of inventory to the level of production and sales. Finally, inventory costs are related to the levels of profit with the aid of basic statistical tools .
Significant of the Study
It is important to consider the social and economic commitment to the growth of the country . So that all the ways that will improve the company’s growth ,it must be exploited, so the researcher’s hope is that this study isuseful for owner of Aref Contractor Company and others.
This research project would help the management of Aref Contractor Company, to identify the most influentia risk of inventory management and production. Furthermore, the study will also help the management of the company, to guide against losses .
In this course, three chapters will be covered that comprises introduction, literature review, and methodology.
Of course, no one thought of an issue in the same way, but the profit of the companies depends on the good management , an issue that seems
Historical sketch of inventory problems
Specification of an inventory system
Problem of inventory management
Inventory Management Techniques
Economic Order Quantity
Vendor Managed Inventory
Activity Based Costing ( ABC )
The balanced scorecard
Inventory management could be a bargains with administration of settled and current resources. Moreover, it involves the management of day by day operational supplies and in our case. Stock is additionally a basic resource in any organization in spite of the fact that agreeing to Barnes (2008) stock is looked at as a risk beneath the just-in-time (JIT) control framework. He agrees with the way accountants treat stock as an resource to the organization. Within the explanation of money related position, stock shows up beneath the current resources of the organization in any case whether it’s for benefit or not for benefit organization. Stock plays a major role and its administration goes a long way in making a difference a firm to develop because it relates to its external customers as well as the inner clients (Gibson, 2013). Therefore, stock is basic within the operation of Aref Contractor Company since they may hold stock as finished products, work in progress or raw materials for advance preparing (Fellows and Rottger (2005) and Shapiro (2009)). Shapiro, (2009) also advises that stock plays a crucial part when it comes to demand 15 planning and as a result, the organization needs to be flexible in its management of its stock when it comes to occasional or regular inventories.
Directors cannot avoid inventory management since it shapes the basis of their in general performance through disposal of uncertainties in their management. For the boards and management of Aref Contractor Company to find out that they are performing over standards, inventory management metric measures should be over board so that they may keep up the management’s certainty (Shapiro, 2009). Subsequently, Just-in-time concept has been found to have a few outlandish hidden cost that increment the cost of doing business in a few cases such as little suppliers to expansive companies .
In any case, the management of stock is important because the firm will be keen to guarantee that its resources and stock are well managed and request estimating is improved to avoid spontaneous acquirement. Stock can double up as stock and resources respectively. Therefore, when an organization improves request estimating, it enables the minimization of operational costs as well as client satisfaction (Hines and Bruce, 2007). When this is often done, it enables an organization plan for the longer term consequently applying different factors that an organization can use for its objective achievement to be specific: request and supply, taken a toll and staff requirements.
HISTORICAL SKETCH OF INVENTORY PROBLEMS:
Although inventory problems are as old as history itself, it has only been since the turn of the century that any attempts has been made to employ analytical techniques in studying these problems. The initial impetus for the use of mathematical methods in inventory analysisseems to have been supplied by the concurrent growth of the contractor company and the various branches of engineering, – especially industrial engineering. The real need for analysis was first recognized in industries that had a combination of production scheduling problems and inventory problems i.e. in situations in which items were produced in lots – the cost of set up being fairly high – and then stored at a factory warehouse (Ardichvili, A., Cardozo, R. and Ray, S., 2003).
SPECIFICATION OF AN INVENTORY SYSTEM:
The inventory system is basically an input-output system. In order to arrive at the best inventory policy i.e. the best decision rules for when and how much to order, it is necessary to have a clear picture of the inventory system.
Figure 2.3 An input-Output representation of an Inventory System.
PROBLEM OF INVENTORY MANAGEMENT:
The problem of inventory involves the formulation of decision rules that answer two important questions:
1. When to place an order (or configure it for production) to restoreinventory?
2. How much should you ask for (or produce) for each supply?
the decision-making rules should aim to meet the expected demand at a minimum or maximum cost of benefits. (Puche, J., Ponte, B., Costas, J., Pino, R. and De la Fuente, D., 2016).
In many situations, our assumptions about known quatity and zero or constant delay are not valid. Demand and delay are often variable quantities, so we know best only their probability distribution. If we assume that the question and the delay are random variables, the analysis of the inventory management problem will become very complex. It has been found, however, that reasonably good situations can be obtained for many practical inventory management problems by assuming that the delay is a known constant.
Inventory management techniques
Inventory management techniques are extremely critical for business operations because their success and cost decrease of the firm’s use require improved supply chain performance and information to the workers (Lambert, 2008). These procedures are basic and information in them is profoundly desirable in this way, managers and obtainment staff need to be able to apply the procedures for the advantage of the organization (Fellows and Rottger, 2005).
Wild (2002) suggests, proper warehousing of stock so that when products items are requested, they are kept at the warehouse for the least time possible minimizing holding cost of stock. Consequently, other operational costs may increase inventory management costs. The way an organization is able to maintain its costs at low levels the way better it is for the year end profits (Palevich, (2012), Wisner, Tan and Leong (2011)). Organizations purchase and sell their stock; there continuously arises balance at the end of the year which have to be be carried over to the next year. Once an organization realizes this, it can create online stock management tool to monitor its stock information by breaking it down into groups by connecting the categories with its clients. Since organizations works differently in numerous fields, the stock can be classifies by either seasons or financial year conclusion of your most critical clients thus, request forecasting got to be employed to have an proficient supply chain (Poiger, 2010).
As organization endeavor to achieve effectiveness, they should be able to understand their ReOrder Levels (ROL) which empowers them know when to order and when not to order. This may be accomplished through the use of quantitative strategies which require proper inventory management (Apte, 2010). Re-Order level is critical for Aref Contractor Company to attain optimal efficiency and be successful leading to high supply chain performance and client satisfaction, at that point they need to have two reorder levels one that’s normal whereas the other is an emergency one in case of disaster (Beamon and Kotleba, 2006).
Economic Order Quantity
Bachetti, Plebani, Saccani and Syntetos (2010) contends that inventory management got to be organized in a consistent way so that the organization can be able to know when to order and how much to order. This will only be accomplished through the Economic Order Amount (EOQ) computation. Economic order amount enables organization to plan their stock replenishment on a timely basis such as month to month, quarterly, half yearly or yearly basis. By so doing, it empowers firms to have minimal storage costs or zero within their warehouses since stock is coming in and going out instantly. In this way, this tends towards the just in time concept of supply chain management received by Toyota motor Organization in Japan which helps in having zero holding costs, (Schonberger, 2008). In this way, as organizations try to progress on the stock management, the Economic Order Quantity (EOQ) and Re-order Point (ROP) are critical tools that organizations can use to guarantee that stock supply does not hit a stock out as explained by Gonzalez and Gonzalez (2010). Over time, organizations have been keeping up their stock in a haphazard way which has required a change within the way firms conduct their business. Stock outs have been experienced adversely leading to client dissatisfaction hence; firms are changing their approach to be able to stay important by employing Economic Order Quantity (EOQ) and Re-order Point (ROP) for client satisfaction.
The derivation of the basic EOQ model (Quantity of economic order) is quite simple in
Total inventory cost is defined as the whole of ordering cost and carrying cost. To define total inventory cost in terms of the controllable variable order amount (Q), we must express both types of cost in terms of amount. Total ordering cost can be gotten by multiplying the number of orders D/Q by the cost of placing an order (Co), consequently:
Annual ordering cost = D/Q Co
So also, annual carrying cost can be found by multiplying the carrying cost per unit of inventory (Cc) by the average number of units in stock (Q/2). This expression for average inventory accept a steady rate of demand all through the year.
Annual carrying cost = D/2 Cc
Combining the two components, we get total inventory cost for the period:
TC = D/Q Co + Q/2 Cc
Activity Based Costing Analysis
Fellows and Rottger (2005) agree that having stock in your store has an advantage for the organization since clients will be satisfied immediately . With stock in your warehouse, an organization has the advantage of timely delivery . Thus, Aref Contractor Company got to guarantee that they have adequate stock for their operations . One way they can accomplish this is thorough the “Pareto Analysis” also known as Activity Based Costing (ABC) analysis. ABC analysis is where stocks are classified into three categories to be specific : A – stock items that are of high value and material to the organization but low volume such as building and engine vehicles; B – stock items which are of medium volume; C – stock items baring minimal value but are of big volume .
2.5.5 Vendor Managed Inventory
Management of inventory decides the way an organization will pushed itself to tall performance efficiency. A few organizations have resulted to vendor managed inventory (VMI) systems which help the provider to monitor customer’s stock usage. Through this VMI system, clients will avoid stock outs since the suppliers will have already recharged their inventory. The key viewpoint here is communication which should be planned well from the starting of business relations between the supplier and the customer (Frahm, 2003). Vendor managed inventory saves an organization immense finance and time since the supplier will be able to monitor its customer’s stock levels and make a point of replenishing them. As the client and supplier connected, the communication channel has to be clear and quick so that they may avoid instances of stock outs. Where the client expects having an irregular order levels, they should notify the supplier so that they can adjust their production to cater for the demand. Moreover, we presently have Joint Managed Inventory (JMI) which is an progress level of vendor managed inventory (VMI). It looks for to integrate the supplier more firmly into the customer’s organization by using the point of sale (POS) which permits the supplier to see the real time data of its customer’s stock (Frahm, 2003).
The balanced scorecard
The balanced scorecard has been used to evaluate the quality of inventory management performance measure and its improvement. In any case, the balance scorecard complements financial measures of past performance with measures of drivers of future performance. The objectives and measures for organizational inventory management performance come from four perspectives; financial, client, internal process and learning and development (BPP, 2008). Consequently, Aref Contractor Company Balance scorecard in relation to transport management has been molded to upgrade its transport and requirements owing to the fact that it has multi-discipline functionalities in its operations. The performance management of Aref Contractor Company has been improved and progressed to foster smooth running of the institution over Jeddah ,Saudi Arabia by guaranteeing that clients are treated well (Sutherland, David and Alistair, 2002).
2.6 Theoretical Recommendation
It is expected that the application of Economic Order Amount, Marginal Analysis, and Just-in-Time, will improve Aref Contractor Company performance. As the staff gets it the strengths of having these strategies, at that point the unnecessary costs caused will be avoided. Therefore, the strategies will progress performance within the following ways:
Table 2.6 : Theoretical Recommendation.
No Inventory Management Techniques
How Performance Improvement will be achieved
1 Economic Order Amount Ability to know how much and when to replenish stock
2 Activity Based Costing Analysis
The organization is able to account for each inventory according to its classification and this can be achieved through the Pareto analysis
3 Just-in-Time Requesting stock when they are required thus reducing storage/holding costs
It would have been best to conduct this research in all the manufacturing companies and contractors companies in Saudi Arabia in arrange to seek after excellence and at the same time achieve the most excellent possible result. However, such a huge amount of companies will pose a few issues. As a result of the attendant monetary, time and other limitations, the research has limited this investigation to only one contractor company in Saudi Arabia: Aref Contractor Company.
3.1 Method for Information collection and analysis
The information used for this investigation were collected from primary and secondary sources of information.
3.1.1 PRIMARY SOURCES
The information were collected from the works accountant, production manager, marketing manager, sale official and other people from the chosen company. It was facilitated through questions, perception and oral interview. These instruments and other means of information collection were found convenient for this study because they helped to induce the view of the literate members of the company . Secondly, in a investigate work of this nature, where information collected will be totally analyzed, the researcher considered it very shrewd to use more of questions in order to avoid gathering of information that will have very small or no pertinence to the subject matter beneath study. Also, considering the kind of respondent being tended to, it was found most attractive because it does not require expound reply. Most of the questions are basic “yes” or “no” type. However others are such that require the respondent to rate a statement into choices; such as “strongly agreed”, “undecided”, “disagree” etc. The survey, generally utilizes a printed format that efficiently indicates all the questions as well as the arrangement to which they are to be presented. All these steps were made for easier investigation of information and result.
3.1.2 SECONDARY SOURCES
The result of existing literatures on stock management helped in~measurablyi n directing the researcher during the study. Other secondary sources of information include:
2.Magazines and Periodicals
3.Reference books and Dictionaries
4.Course reading materials
5.Secondary information also exists within the company
6.Examination of the company’s yearly reports and journals.
3.2 Pilot survey
A pilot overview was carried out to eliminate all ambiguous questions from the study instrument used. The pilot study was similarly carried out since the level of understanding contrasts among the respondents. The sample for this pre-testing was drawn from the company reviewed. The pilot study empowered the researcher to test the respondents’ attitudes to the questions and terms used.
3.3 Sample techniques
For easier collection of information, only Aref Contractor Company was used as a case study, since all others might not be covered as a result of time and financial constraints. The observations and results got from the company were used to generalize and predict what is obtainable in all other contractor companies, particularly within the areas of their stock management.
PROCEDURE AND TECHNIQUES FOR DATA ANALYSIS:
Majority of the questions within the survey have relevance to the speculation and investigate questions raised earlier. Information from the different questions were categorized concurring to their pertinence to the confirmation of the theory of this research project and realization of the stated goals. The information were analyzed utilizing basic statistical (eg mean, chi-square, regression and correlation co-efficient) and mathematical methods. The economic order quantity of the company was calculated after estimating a few figures, as a few of the required figures were not in existence within the company’s books.
However, from the available information, relationship between certain variables were determined and analyzed. The relationship that existed between variables have been tested within the speculation for validity and reliability. Information for writing survey were obtained from relevant books. Most quantitative information were drawn from the accounts office of the Aref Contractor Company.
This study sort to answer the questions what is the inventory management techniques application, how to determine the affect and challenges of inventory management techniques and how to determine the challenges of inventory management techniques in Aref Contractor Company .It was established that Aref Contractor Company has worked for more than ten years meaning they have been developing . However, the Aref Contractor Company should embrace inventory management techniques so that they can gain more profits and they extend all across of Saudi Arabia